WINDOWS 2000 SETUP SHEETCheck wire configuration in the computer, (jumpers, primary master, secondary master)Boot up and get on the bios by pressing delete, change it so that it boots off the CD rom not the floppy, then change primary, and secondaryPrimary master type: auto P10: - 32 bit: OnSecondary master Cdrom Auto OnF10 to saveOnce you come out of the Bios, reboot, and then put cd in immediatelySetup will first load files into ramThe last two are the most important filesPress enter when its finishedF8 to agreeEsc-don't repairHit D for delete partitionEnter to continue with deletionPress l to deletHit enter to setup partition in the spaceFormat the partition using the NTFS file systemIf message comes up that you cannot copy a file, retry atleast once, the get a diferent cd, then retry againWhen it reboots on its own, take the disk out, then shut it back downStart back up and put the disk in at the windows 2000 loading screenIt will then start installing the devicesRegional settings- click nextName - Ganado ISD, nextComputer name GISD#, nexttime zone- central, nextNetwork settings- typical , nextWorkgroup-no, GANADOISD, yes, then click no, nextInstalls componentsFinal tasksFinishes, reboot, take disk outWhen it comes up don't put a password just click okThe 1st thing you check is video, go to properties on the desktop, Pixels 800 by 600, true color 32 bit, applyNext you check the nic by going to device manager by right clicking my computer, properties, go to hardware, device manager.
